Abstract

A ground-structure vibration response study was carried out at the Ramappa Temple near Warangal, Telangana, India, shaken by underground blasting undertaken at the neighbouring Devadula Lift Irrigation Project to build water tunnels. The intensities of vibrations were examined–subsurface and ground vibrations were measured using velocity meters, and shaking at the temple using accelerometers. The study concluded that high-frequency vibrations of the ground were filtered by the soft natural clay bed underneath, and vibrations at the temple structure were small and well below the levels that can cause damage to it. Here we present the scientific findings of the vibrations recorded during the blasts and their implications.

Abstract

In building construction, reinforced concrete (RC) Frame structures are frequently used due to ease of construction and rapid progress of work. In this study, two types of infill’s are used ie, unreinforced masonry infill and semi-interlocked masonry infill. For the analysis purpose of infill, a double strut nonlinear cyclic model is used. The main objective of the study is to investigate the importance of interlocked brick infill in the RC frame structure. For understanding the same, nonlinear static pushover analysis is carried out on analytical models using finite element based software, SeismoStruct. The response reduction factor components such as ductility reduction factor and overstrength factors were computed from nonlinear static pushover analysis and finally, the response reduction factor is calculated for all models. The primary focus is given to numerical modeling, nonlinear behavior of brick masonry RC buildings subjected to lateral loads and calculation of the response reduction factor of'RC'infilled frames with different aspect ratios.

Abstract

Catchment scale conceptual hydrological models apply calibration parameters entirely based on observed historical data in the climate change impact assessment. The study used the most advanced machine learning algorithms based on Ensemble Regression and Random Forest models to develop dynamically calibrated factors which can form as a basis for the analysis of hydrological responses under climate change. The Random Forest algorithm was identified as a robust method to model the calibration factors with limited data for training and testing with precipitation, evapotranspiration and uncalibrated runoff based on various performance measures. The developed model was further used to study the runoff response under climate change variability of precipitation and temperatures. A statistical downscaling model based on K-means clustering, Classification and Regression Trees and Support Vector …

Abstract

In the present study, it was attempted to investigate the cyclic resistance of equi-proportionate silt–sand range pond ash (with 50% fines) at relatively high shear strains using the strain-controlled cyclic triaxial test. The cyclic triaxial tests have been performed considering the effect of relative compaction (97–99%), cyclic shear strain (0.6–1.35%), frequency of loading (0.3–1 Hz) and effective confining pressure (50–100 kPa) on cyclic resistance of pond ash. Dynamic characteristics such as dynamic shear modulus and damping ratio of equi-proportionate silt–sand range pond ash was evaluated for all the parameters considered at high shear strain. The maximum value of the dynamic shear modulus and damping ratio of pond ash observed in this study was 6534.8 kPa and 23.64%, respectively. The dynamic shear modulus and damping ratio of pond ash was decreased from 6534.8 to 5023.87 kPa and 23.64 to 14.17 …

Abstract

We thank the respected discussers for appreciating the relevance of the present work, critically analyzing it, and bringing forth the possible constraints in its applicability. This discussion provides us an opportunity to elaborate the point related to the scope and applicability of original work, especially with focus on the hydrological community that otherwise would possibly remain unclarified. Because there are two discussions of our paper, we have addressed them in two different sections.

Abstract

High resolution Digital Elevation Models (DEMs) are an important requirement for many applications like modelling water flow, landslides, avalanches etc. Yet publicly available DEMs have low resolution for most parts of the world. Despite tremendous success in image super resolution task using deep learning solutions, there are very few works that have used these powerful systems on DEMs to generate HRDEMs. Motivated from feedback neural networks, we propose a novel neural network architecture that learns to add high frequency details iteratively to low resolution DEM, turning it into a high resolution DEM without compromising its fidelity. Our experiments confirm that without any additional modality such as aerial images (RGB), our network DSRFB achieves RMSEs of 0.59 to 1.27 across 4 different datasets.

Abstract

This paper proposes a system for monitoring of condition and surface of roads in developing countries like India. This system will be used by government agencies to monitor municipal activities like road laying and planning. The system utilizes a database created by geo-citizens or government workers as an input. The heavy machinery in existing systems is not an optimized solution to this problem. Some existing systems use GPS and accelerometer data for determining such artifacts. So, it is evident that there is a need for a system that generates robust, frequent and accountable geo-tagged data. We propose a new collaborative model for such a purpose by fusion of data from multiple sensors hosted on smart-phones of several active geo-citizens. The system focuses mainly on volunteered geographic information, in which users can use their respective smart-phones to collect the data required and upload it for …

Abstract

Radio Frequency (RF) based sensors have shown great potential for the qualitative and quantitative analysis of different chemical and biological entities. In this work, the feasibility of performing RF based sensing by using gold particles has been explored with the help of the computational tool, HFSS (High Frequency Structure Simulator). The analysis is performed for an Interdigitated Capacitor based sensor. Various physical parameters of cylindrical gold particles such as radius and thickness have been varied, and the electrical parameters of the sensor systems have been studied. In particular, the reflection coefficients have been determined for various cases. In addition to the physical parameters, different configurations of the gold particles such as their linear and non-linear arrangements have been analyzed. The analyses offer promising results for the development of efficient sensing platforms.

Abstract

The importance of algorithms and data structures in computer science curricula has been amply recognized.For many students, however, gaining a good understanding of algorithms remains a challenge.Because of the automated nature of sequential algorithms there is an inherent tension in directly applying the ‘learning by doing’ approach. This partly explains the limitations of efforts like algorithm animationand code tracing.Algodynamics, the approach we propose and advocate, situates algorithms within the framework of transi-tion systems and their dynamics and offers an attractive approach for teaching algorithms. Algodynamics starts with the premise that the key ideas underlying an algorithm can be identified and packaged into interactive transition systems. The algorithm when ‘opened up’, reveals a transition system, shorn of most control aspects, enriched instead with interaction. The design of an algorithm can be carried out by constructing a series of interactive systems, progressively trading interactivity with automation. The setransition systems constitute a family of notional machines.We illustrate the algodynamics approach by considering Bubblesort. A sequence of five interactive tran-sition systems culminate in the classic Bubblesort algorithm. The exercise of constructing the individualsystems also pays off when coding Bubblesort: a highly modular implementation whose primitives are bor-rowed from the transition systems. The transition systems used for Bubblesort have been implemented as interactive experiments. These web based implementations are easy to build. The simplicity and flexibility afforded by the algodynamics framework makes it an attractive option to teach algorithms in an interactive way.

Abstract

Rice blast disease is a major threat to rice production worldwide; the causative pathogenic fungus Magnaporthe oryzae induces rice (Oryza sativa) plants to undergo molecular changes that help them to circumvent this fungal attack. Transcriptome studies have demonstrated that many genes are involved in the defense response of rice to M. oryzae, but most of these studies focused on the screening of differentially expressed genes and the studies did not investigate the interactions among genes. We examined the interaction of rice and M. oryzae in a network context. Two near-isogenic lines were profiled at different time-points. Using transcriptome data obtained from an RNASeq analysis, a network based on the relationships among genes was developed through weighted gene co-expression network analysis. The analysis of degree centrality identified numerous hub genes and potential key regulators that control the rice response, providing new insights into the molecular network underlying the resistance of rice to M. oryzae infection. Additionally, a protein-protein interaction network was derived to identify complexes that might physically interact. For example, complexes of OsbHLH148/OsJAZ, OsMYB4 and some components of the phenylpropanoid pathway, as well as MYB/bHLH