Abstract

This brief proposes a new adaptive-robust formulation for time-delay control (TDC) under a less-restrictive stability condition. TDC relies on estimating the unknown system dynamics via the artificial introduction of a time delay, often referred to as time-delay estimation (TDE). In conventional TDC, the estimation error, called TDE error, is taken to be upper bounded by a constant under the assumption of small time delay and, most importantly, of a priori bounded states. We highlight the issues of such a conventional methodology via an unstable the upper bound of the TDE error is formulated, which has an explicit dependence on system states and is valid for any chosen time delay. This insight leads to a new TDC design, namely, time-delayed adaptive-robust control (TDARC). The effectiveness of TDARC is substantiated via a multiple-degrees-of-freedom robot.

Abstract

Available control methods for underactuated Euler–Lagrange (EL) systems rely on structure-specific constraints that may be appropriate for some systems, but restrictive for others. A generalized (structure-independent) control framework is to a large extent missing, especially in the presence of uncertainty. This paper introduces an adaptive-robust control framework for a quite general class of uncertain underactuated EL systems. Compared to existing literature, the important attributes of the proposed solution are: (i) avoiding structure-specific restrictions, namely, symmetry condition property of the mass matrix, and a priori bounds on non-actuated states or state derivatives; (ii) considering Coriolis, centripetal, friction and gravity terms to be unknown, while only requiring the knowledge of maximum perturbation around a nominal value of the mass matrix; (iii) handling state-dependent uncertainties irrespective of their linear or nonlinear in parameters structure. These features significantly widen the range of underactuated EL systems the proposed solution can handle in comparison to the available methods. Stability is studied analytically and the performance is verified in simulation using offshore boom crane dynamics.

Abstract

The literature has proven that attaining good transient behavior in leakage-based robust adaptive control of uncertain switched systems is intrinsically challenging. In fact, because the gains of the inactive subsystems must exponentially vanish during inactive times as an effect of leakage action, new learning transients will repeatedly arise at each switching instant. In this paper, a new leakage-based mechanism is designed for robust adaptive control of uncertain switched systems: in contrast to the available designs, the key innovation of the proposed one is that the adaptive gains of the inactive subsystems can be kept constant to their switched-off values, thus preventing vanishing gains. Bounded stability of the closed-loop switched system is guaranteed thanks to the introduction of an auxiliary gain playing the role of leakage. A benchmark example commonly adopted in adaptive switched literature shows that the proposed strategy can consistently improve the transient behavior under various families of switching signals.

Abstract

With the growing demand of large-scale heavy lift vessels in the deep-sea offshore construction works, high performance of Dynamic positioning (DP) systems is becoming ever crucial. However, current DP systems on board of heavy lift vessels do not consider model uncertainty (typically arising from mooring forces). In this paper, an observer-based robust controller is designed that can tackle model uncertainty in hydrodynamic damping and mooring forces, environmental disturbances as well as can filter out the high-frequency vessel movement. Closed-loop system stability is analytically established in terms of uniformly ultimately boundedness. In addition, several key performance indicators are provided for tuning the performance of the controller. The effectiveness of the proposed control framework is studied in simulation with a crane-vessel system.

Abstract

In the literature of any time-delay control (TDC)-based methods, the boundedness of the error due to time-delay estimation (TDE) is crucial to prove the stability. However, the TDE error has been studied by discretizing the closed-loop system while neglecting the effect of discretization error; consequently, the TDE error is considered to be upper bounded by a constant. This letter proves that such constant upper bound is restrictive in nature due to the explicit involvement of system states in the TDE error. Thereby, without discretizing the closed-loop system, a new structure of the upper bound of TDE error is directly formulated in the continuous-time domain which has an explicit dependency on the system states. Via this formulation, this letter solves the long-standing problem for TDC of having consistent stability analysis and control design in continuous time. Based on the newly proposed structure of TDE error, an enhanced robust control law is formulated. The effectiveness of the proposed method is experimentally substantiated as compared to the conventional TDC using a multiple-degrees-of-freedom robot.

Abstract

This letter proposes a new adaptive control method for a class of nonlinearly parametrized switched systems that includes Monod kinetics and Euler-Lagrange systems with nonlinear in parameters form as special cases. As compared to the adaptive switched frameworks proposed in literature, the proposed adaptation framework has the distinguishing feature of updating the gains of the active and inactive subsystems simultaneously: by doing this it avoids high gains for the active subsystems or vanishing gains for the inactive ones. The design is studied analytically and its performance is validated in simulation with a robotic manipulator example.

Abstract

The adaptive sliding mode control technique relaxes the assumption of known bound of the disturbance in discrete-time systems. However, the existing technique of gain adaptation in discrete-time sliding mode control has issues of gain overestimation and underestimation. Therefore, this paper proposes a technique to adapt the switching gain such that the adaptive gain can tackle the uncertainty without any knowledge of the bound of uncertainty while overcoming the over- and under-estimation problems of switching gain.

Abstract

The actual performance of model-based path-following methods for unmanned aerial vehicles (UAVs) shows considerable dependence on the wind knowledge and on the fidelity of the dynamic model used for design. This study analyzes and demonstrates the performance of an adaptive vector field (VF) control law which can compensate for the lack of knowledge of the wind vector and for the presence of unmodeled course angle dynamics. Extensive simulation experiments, calibrated on a commercial fixed-wing UAV and proven to be realistic, show that the new VF method can better cope with uncertainties than its standard version. In fact, while the standard VF approach works perfectly for ideal first-order course angle dynamics (and perfect knowledge of the wind vector), its performance degrades in the presence of unknown wind or unmodeled course angle dynamics. On the other hand, the estimation mechanism of the proposed adaptive VF effectively compensates for wind uncertainty and unmodeled dynamics, sensibly reducing the path-following error as compared to the standard VF.

Abstract

Underestimation and overestimation problems are commonly observed in conventional adaptive sliding mode control (ASMC). These problems refer to the fact that the adaptive controller gain unnecessarily increases when the states are approaching the sliding surface (overestimation) or improperly decreases when the states are getting far from it (underestimation). In this paper, we propose a novel ASMC strategy that overcomes such issues. In contrast to the state of the art, the proposed strategy is effective even when an a priori constant bound on the uncertainty cannot be imposed. Comparative results using a two-link manipulator demonstrate improved performance as compared to the conventional ASMC. Experimental results on a biped robot confirm the effectiveness and robustness of the proposed method under various practical uncertainties.

Abstract

A consideration of actuator saturation is an important aspect to study the effectiveness of a designed controller in practice. However, the conventional Lyapunov theory-based design is not always suitable to analyze the quantitative behavior of closed-loop system. This article presents a time-scale redesign-based saturated tracking controller for a class of feedback linearizable multi-input-multi-output (MIMO) nonlinear systems. The proposed controller is built upon the frameworks of contraction and partial contraction theories which ensures that bounded tracking performance as well as quantify the steady-state error bounds in terms of the various control design parameters. Notably, in contrast to the existing Lyapunov-method-based designs, the proposed approach allows to tune the controller performance without arbitrary reduction of singular perturbation parameters. Therefore, the vulnerability of the controller toward actuator saturation and noise, due to the ill-effects of high-gains stemming from the conventional high-gain controllers, are reduced. The extensive experimental results using a wheeled mobile robot are provided to demonstrate the effectiveness of the proposed controller.