Abstract

Reducing the amount of wireless data transmissions in constrainedbattery-powered sensor nodes is an effective way of prolongingtheir lifetime. In this paper, we present a machine learning-baseddata transmission reduction scheme for application-specific IoTnetworks. Though many error thresholding-based data predictionschemes have been explored in the past, this is the first work toincorporate machine learning in constrained sensor nodes to reducedata transmissions. We also provide a generic overview and com-parison of five traditional supervised machine learning algorithmsin the context of offloading trained models to memory and computa-tionally constrained microcontrollers. The proposed data reductionscheme is validated on an occupancy estimation testbed deployed inour lab. Experimental results demonstrate 99.91% overall reductionin data transmissions while imparting similar performance and 18to 82 times lesser transmissions than Shewhart change detectionalgorithm.

Abstract

This paper analyzes the performance of low earth orbit (LEO) satellites based internet-of-things (IoT) network where each IoT node makes use of multiple satellites to communicate with the ground station (GS). In this work, we consider fixed and variable gain amplify-and-forward (AF) relaying protocol at each satellite where the received signal from each IoT node is amplified before transmitting to the terrestrial GS for data processing. To analyze the performance of this novel LEO satellites based direct access architecture, the closed-form expressions for outage probability are derived considering two combining schemes at the GS:(i) selection combining;(ii) maximal ratio combining. Further, to gain more insights for diversity order and coding gain, asymptotic outage probability analysis at high SNR for both schemes is also performed. Finally, simulation results are presented to validate the analytical results derived and also to develop several interesting insights into the system performance.

Abstract

Current air pollution monitoring systems are bulky and expensive resulting in a very sparse deployment. In addition, the data from these monitoring stations may not be easily accessible. This paper focuses on studying the dense deployment based air pollution monitoring using IoT enabled low-cost sensor nodes. For this, total nine low-cost IoT nodes monitoring particulate matter (PM), which is one of the most dominant pollutants, are deployed in a small educational campus in Indian city of Hyderabad. Out of these, eight IoT nodes were developed at IIIT-H while one was bought off the shelf. A web based dashboard website is developed to easily monitor the real-time PM values. The data is collected from these nodes for more than five months. Different analyses such as correlation and spatial interpolation are done on the data to understand efficacy of dense deployment in better understanding the spatial variability and time-dependent changes to the local pollution indicators.

Abstract

This paper proposes the use of Shewhart test to reduce the number of data-transmissions in IoT networks. It is shown to outperform the widely-used least mean square (LMS) based data reduction method in terms of the number of data-transmissions, implementation complexity and mean square error (MSE) in prediction of time-series data at the sink node based on the partial transmissions of the measured time-series data from the sensor node. The paper also proposes the use of piggybacking and interpolation to further reduce the MSE of the estimated time-series data at the sink node without increasing the number of packet transmissions. The time-series data used for the comparison of data reduction algorithms is a set of measured temperature values in indoor and outdoor scenarios for four days using custom-designed wireless sensor nodes. To express the effectiveness of the piggybacked transmissions on battery lifetime, the total current consumption of the sensor node is measured for different number of piggybacks and corresponding battery lifetime is estimated. It is shown that the proposed piggyback approach significantly reduces the MSE at the cost of slight decrease in battery-lifetime. Published in: 2019 IEE

Abstract

This paper proposes the use of Shewharttest to reduce the number of data-transmissions in IoT networks. It is shown to outperform the widely-used least mean square (LMS) based data reduction method in terms of the number of data-transmissions, implementation complexity and mean square error (MSE) in prediction of time-series data at the sink node based on the partial transmissions of the measured time-series data from the sensor node. The paper also proposes the use of piggy-backing and interpolation to further reduce the MSE of the estimated time-series data at the sink node without increasing the number of packet transmissions. The time-series data used for the comparison of data reduction algorithms is a set of measured temperature values in indoor and outdoor scenarios for four days using custom-designed wireless sensor nodes. To express the effectiveness of the piggybacked transmissions on battery lifetime, the total current consumption of the sensor node is measured for different number of piggybacks and corresponding battery lifetime is estimated. It is shown that the proposed piggyback approach significantly reduces the MSE at the cost of slight decrease in battery-lifetime

Abstract

In this paper, sum link capacity expressions for successive interference cancellation (SIC) and regarding interference as noise (IAN) in reverse time-division duplexing (RTDD) heterogeneous cellular network are derived. The considered RTDD network always operates in a synchronized fashion such that if the macro tier is in the uplink (UL), then the small tier will be in the downlink (DL) and vice-versa. Rate and power throttling are used in the uplink (UL) for both IAN and SIC to consider an asymmetric traffic network (DL≫ UL). Systemlevel simulations are performed to compare the overall system throughput of IAN and SIC for different DL/UL ratios. It is observed that rate or power-throttled SIC performs better than rate-throttled IAN and worse than power-throttled IAN.

Abstract

The focus of this paper is on evaluating different spatial interpolation methods for the construction of radio environment map using field measurements obtained by cyclostationary-based mobile sensors. Mobile sensing devices employing cyclostationary detectors provide lot of advantages compared to the widely used energy detectors, such as robustness to noise uncertainty and ability to distinguish among different primary user signals. However, mobile sensing results are not available at locations between the sensors making it difficult for a secondary user (possibly without a spectrum sensor) to decide whether to use primary user resources at that location. To overcome this, spatial interpolation of test statistics measured at limited number of locations can be carried out to create a channel occupancy map at unmeasured locations between the sensors. For this purpose, different spatial interpolation techniques for the cyclostationary test statistic have been employed in this paper such as inverse distance weighting, ordinary kriging, and universal kriging. The effectiveness of these methods is demonstrated by applying them on extensive real-world field measurement data obtained by mobile-phone-compliant spectrum sensors. The field measurements were carried out using four mobile spectrum sensors measuring eight digital video broadcasting-terrestrial (DVB-T) channels at more than hundred locations encompassing roughly one-third of the area of the city of Espoo in Finland. The accuracy of the spatial interpolation results based on the field measurements is determined using the cross-validation approach with the widely used root mean square error as the metric. Field measurement results indicate that reliable results with spatial coverage can be achieved using kriging for cyclostationary based test statistics. Comparison of spatial interpolation results of cyclostationary test statistics is also carried out with those of energy values obtained during the measurement campaign in the form of received signal strength indicator. Comparison results clearly show the performance improvement and robustness obtained using cyclostationary based detectors instead of energy detectors.

Abstract

The focus of this paper is on a feature detector for filter bank multicarrier (FBMC) signal in cognitive radio. In this paper, we first prove that the FBMC signal samples are uncorrelated with each other. However, if the FBMC signal is processed by our proposed method, then the autocorrelation function (ACF) of FBMC signal becomes non-zero at the lag equal to number of subcarriers. On the other hand, additive white Gaussian noise (AWGN) samples after the same proposed processing remain uncorrelated. Using this feature, an autocorrelation based feature detector is proposed to detect FBMC signal in noise. The main advantage of the proposed detector is that, unlike blind detectors, this detector can distinguish between FBMC signal and noise (or interference). Next, the distribution of the test statistic of the proposed detector is derived under noise-only scenario so that the threshold of the Neyman-Pearson detector can be designed to maintain constant false alarm rate while maximizing the probability of detection. Simulation results demonstrate the efficacy of the proposed detector

Abstract

In this paper, we investigate a distributed and heterogeneous cognitive radio network (CRN), comprising of secondary users (SUs) employing either energy detector (ED) or autocorrelation detector (AD) to detect the presence or absence of an orthogonal frequency-division multiplexing (OFDM) based primary user (PU). For the considered heterogeneous cooperative spectrum sensing (CSS), the optimal soft combining rule is derived. The performance of this optimal fusion rule and different hard combining schemes such as OR, AND, and MAJOR- ITY is presented for the case when the noise variance is exactly known. Later, the effect of noise uncertainty is also presented. The proposed heterogeneous CSS is shown to combine the excellent performance of the EDs (when the noise variance is exactly known) and robustness of the ADs to the noise uncertainty.

Abstract

In this paper, we propose two two-stage spectrum sensing schemes for a single secondary user (SU) or cognitive radio (CR) with multiple antennas to detect a primary user (PU) transmission. For both the proposed schemes, the first stage involves low-complexity coarse-sensing using simple energy detection (ED). The second stage for both methods involve high-performance fine-sensing using beamformed energy detection (BFED) in the estimated direction of arrival (DoA) of the PU signal. In the two-stage method, the second stage is conditional and sensing process goes to the second stage only if certain performance criteria is not met in the first stage. The two proposed methods differ in the performance criteria, which decides if the second stage of BFED is needed or not. The first two-stage method is designed to reduce complexity when there is no PU transmission while the second method is designed to reduce complexity when the PU signal is present. It is shown through simulations that the proposed two-stage schemes have significantly lower complexity as compared to only employing single-stage BFED with little or no performance loss.